rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14012 2 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . rf micro devices ? and rfmd ? are trademarks of rfmd, llc. bluetooth is a trademark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks, and registered trademarks are the property of their respective owners. ?2013, rf micro devices, inc. 1 of 3 D8740320GT gaas power doubler hybrid 40 mhz to 870 mhz the D8740320GT is a hybrid power doubler amplifier module. the part employs gaas die and is operated from 40mhz to 870mhz. it provides excellent linearity and superior return loss performance with low noise and optimal reliability. package: sot - 115j features excellent linearity superior r eturn loss performance extremely low distortion optimal reliability low noise unconditionally stable under all terminations 32.0 db min. gain at 870mhz 375 ma max. at 24vdc applications 40mhz to 870 mhz cat v amplifier systems ordering information D8740320GT box with 5 0 pieces absolute maximum rat ings parameter rating unit rf input voltage (single tone) 75 dbmv dc supply over - voltage (5 minutes) 30 v storage temperature - 40 to +100 c operating mounting base temperature - 30 to +100 c caution! esd sensitive device. rohs (restriction of hazardous substances): compliant per eu directive 2011/65/eu. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical performance or functional operation of the device under absolute maximum r ating conditions is not implie D8740320GT
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14012 2 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by r f micro devices, inc. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 3 D8740320GT nominal operating parameters parameter specification unit condition min typ max general performance v + = 24v; t mb = 30c; z s = z l = 75 power gain 30.8 31.5 db f = 50mhz 32.0 33.5 db f = 870 mhz slope [ 1 ] 1.0 2.5 db f = 40mhz to 870 mhz flatness of frequency response 0.6 db f = 40mhz to 870 mhz (peak to valley) input return loss 20.0 db f = 40mhz to 320mhz 19.0 db f = 320mhz to 640mhz 17.0 db f = 640mhz to 870mhz output return loss 20.0 db f = 40mhz to 320mhz 19.0 db f = 320mhz to 640mhz 18.0 db f = 640mhz to 870mhz noise figure 3.5 4.5 db f = 50mhz to 870 mhz total current consumption (dc) 360.0 375.0 ma distortion data 40mhz to 750 mhz v + = 24v; t mb = 30c; z s = z l = 75 ctb - 6 0 dbc 112 ch . 10db tilted ; v 0 = 50 dbmv at 750 mhz [ 2 ] xmod - 55 dbc cso - 6 3 dbc 1 . the slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 112 channels, ntsc freq uency raster: 55.25mhz to 745.25 mhz, +4 0 dbmv to +5 0 dbmv tilted output level. composite second order (cso) - the cso parameter (both sum and difference products) is defined by the ncta. composite triple beat (ctb) - the ctb parameter is defined by the ncta. cross modulation (xmod) - cross modulation (xmod) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested.
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14012 2 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by r f micro devices, inc. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 3 D8740320GT package drawing (dimensions in millimeters) 13, 4 1 2 3 5 7 8 9 r o q m 5 10mm 0 scale b n l f a d h ? g t s p j u i e c k european projection n o m i n a l m i n m a x a 4 4 , 6 0 , 2 4 4 , 4 4 4 , 8 b 1 3 , 6 0 , 2 4 4 , 4 1 3 , 8 c 2 0 , 4 0 , 5 1 9 , 9 2 0 , 9 d 8 0 , 1 5 7 , 8 5 8 , 1 5 e 1 2 , 6 0 , 1 5 1 2 , 4 5 1 2 , 7 5 f 3 8 , 1 0 , 2 3 7 , 9 3 8 , 3 g 4 + 0 , 2 / - 0 , 0 5 3 , 9 5 4 , 2 h 4 0 , 2 3 , 8 4 , 2 i 2 5 , 4 0 , 2 2 5 , 2 2 5 , 6 j u n c 6 - 3 2 - - k 4 , 2 0 , 2 4 , 0 4 , 4 l 2 7 , 2 0 , 2 2 7 , 0 2 7 , 4 m 1 1 , 6 0 , 5 1 1 , 1 1 2 , 1 n 5 , 8 0 , 4 5 , 4 6 , 2 o 0 , 2 5 0 , 0 2 0 , 2 3 0 , 2 7 p 0 , 4 5 0 , 0 3 0 , 4 2 0 , 4 8 q 2 , 5 4 0 , 3 2 , 2 4 2 , 8 4 r 2 , 5 4 0 , 5 2 , 0 4 3 , 0 4 s 2 , 5 4 0 , 2 5 2 , 2 9 2 , 7 9 t 5 , 0 8 0 , 2 5 4 , 8 3 5 , 3 3 u 5 , 0 8 0 , 2 5 4 , 8 3 5 , 3 3 p i n n a m e 1 i n p u t 2 - 3 g n d 4 5 + v b 6 7 - 8 g n d 9 o u t p u t pinning: notes:
|
